1-15mm Stainless Steel Taper Scale Diameter Feeler Gauge and 15cm with Pock and Without Pock Clip Ruler

LONG JER's 1-15mm STAINLESS STEEL WEDGE TAPER FEELER GAP GAUGE & 2-IN-1 COMBINATION 

1-15mm STAINLESS STEEL TAPER SCALE DIAMETER FEELER GAUGE AND 15cm POCKET CLIP RULER (WITH AND WITHOUT POCKET CLIP) is a lightweight, small size and easy to carry, you can simply keep it in your bag. With both Metric and Inch scale marks. To measure gap, hole, slot and the other to measure depth. (Allows taper feeler and diameter measurement testing, better for welding inspection work.) Please contact us NOW to find out what you need at a competitive price.

1-15mm STAINLESS STEEL WEDGE TAPER FEELER GAP GAUGE (STAINLESS STEEL WEDGE FEELER GAP / GAP HOLE TAPER GAUGE/ TAPER FEELER HOLE GAUGE / RAPID SCALE TAPER GAUGE ) 

2-IN-1 COMBINATION 1-15mm STAINLESS STEEL TAPER SCALE DIAMETER FEELER GAUGE AND 15cm RULER 

2-IN-1 COMBINATION 1-15mm STAINLESS STEEL TAPER SCALE DIAMETER FEELER GAUGE AND 15cm POCKET CLIP RULER 

✦Product Features    

A lightweight, small size and easy to carry, you can simply keep it in your bag. 

With both Metric and Inch scale marks for easy to make measurement and convenient reading. 

For #528-B15: Widely used in the field of taper, welding, bearing work and gaging slots measurement. 

For measuring of cylindrical bores, diameters of small holes, slots etc. On the rear side you find a diameter correction table for imperial measurements of pipes.

For #528-BR15 & 528-BR15C: Two parts design, one part can be used to measure gap, hole, slot and the other to measure depth. (Allows taper feeler and diameter measurement testing, better for welding inspection work.)

✦Product Details 

LONGJER NO : 528-B15

1-15mm STAINLESS STEEL WEDGE TAPER FEELER GAP GAUGE 

(STAINLESS STEEL WEDGE FEELER GAP / GAP HOLE TAPER GAUGE/ 

TAPER FEELER HOLE GAUGE / RAPID SCALE TAPER GAUGE ) 

1.) Welding taper gauge, both METRIC and IMPERIAL measurements. 

     Range: 1-15mm (1/64-5/8”). Graduations: 0.1mm (1/64”).

2.) Dimensions: 15.2*17 *1.2mm, Accuracy: 1 mm 

3.) Made of stainless steel, miniature and light weight. Polished, rust laser engraved line and will not rub off.    

      Marking scale is etched very clearly for easy reading.

4.) Widely used in the field of taper, welding, bearing work and gaging slots measurement. For measuring of 

     cylindrical bores, diameters of small holes, slots etc. It must be inserted upright with the narrow, 1.2 mm

     wide edge. On the rear side you find a diameter correction table for imperial measurements of pipes.

5.) With a hole on one side. It is compact and lightweight, easy for hanging, carrying and convenient for use.

6.) Packing: @pc-polybag, 50/1200pc/ctn, 18/19kgs

                    @pc-sliding card, 500pcs/ctn; 12.5/13.5kgs

LONGJER NO : 528-BR15

2-IN-1 COMBINATION 1-15mm STAINLESS STEEL TAPER SCALE DIAMETER FEELER GAUGE AND 15cm RULER 

1.) Stainless steel ruler :1-150mm / 6” , graduations 0.5mm and 64ths.Metric/Inch measurement.

2.) Welding taper gauge, double sided: METRIC and IMPERIAL measurements. 

      Range: 0.4-15mm (1/64-5/8”). 

      Reading graduation:1 mm / 1/8”, Accuracy: 0.1mm (1/64”).

3.) With both Metric and Inch scale marks for easy to make measurement and convenient reading. 

4.) Two parts design, one part can be used to measure gap, hole, slot and the other to measure 

     length. (Allows taper feeler and diameter measurement testing, better for welding inspection work.)

5.) Pack:@pc-polybag; 600pcs/ctn; 15/16kgs

              @pc-sliding card; 500pcs/ctn; 17.5/18.5kgs

LONGJER NO : 528-BR15C

2-IN-1 COMBINATION 1-15mm STAINLESS STEEL TAPER SCALE DIAMETER FEELER GAUGE 

AND 15cm POCKET CLIP RULER 

1.) Stainless steel ruler :1-150mm / 6 , graduations 0.5mm and 64ths. Metric/Inch measurement

     with pocket clip.

2.) Welding taper gauge, double sided: METRIC and IMPERIAL measurements. 

     Range: 0.4-15mm (1/64-5/8”). 

     Reading graduation:1 mm / 1/8”, Accuracy: 0.1mm (1/64”).

3.) With both Metric and Inch scale marks for easy to make measurement and convenient reading. 

4.) Two parts design, one part can be used to measure gap, hole, slot and the other to measure 

     depth and length. (Allows taper feeler and diameter measurement testing, better for welding 

     inspection work.)

5.) Pack:@pc-polybag; 600pcs/ctn; 12/13kgs 

              @pc-sliding card; 500pcs/ctn; 15/16kgs